ITEM # NEW PART NUMBER DESCRIPTION 1 DESCRIPTION 2 DESCRIPTION 3 NO. REQ'D
1[1] H02-0050 ZB2 - SWITCH, 2 POSITION, POWER ON/OFF NDT-POWER ONOFF OPERATOR AND CONTACT BLOCKS 1
1 H02-0070 ZB4 - POWER ON/OFF, SWITCH COMPLETE ZB4-ON/OFF POWER ON/OFF 1
2[2] H02-0037 ZB2 - FABRIC/STEEL LIGHT COMPLETE NDT-FABRIC LITE WHITE LENSE W/CONTACT 1
2 H02-0062 ZB4 - FAB/STEEL LIGHT COMPLETE ZB4-FAB LIGHT WHITE LENS 1
3 H02-0038 ZB2 - 2 POS SWITCH, COMPLETE, STEEL/FABRIC NDT-FABRICSTEEL OPERATOR AND CONTACT BLOCKS 1
3 H02-0063 ZB4 - 2 POS SWITCH COMPLETE, FAB/STEEL ZB4 ZB4-FAB/STEEL FABIC/STEEL OPERATOR 1
5[3] H02-0040 ZB2 - SWITCH, COMPLETE, RED MUSHROOM NDT-HV ON/OFF OPERATOR AND CONTACT BLOCKS 1
5[4] H02-0066 ZB4 - 40MM RED MUSHROOM SWITCH COMPLETE ZB4-HV ON/OFF 40MM MUSHROOM HEAD 1
6 H02-0036 ZB2 - SWITCH, COMPLETE, ARM SWING NDT-ARM SWING NDT-IIS COMPLETE WITH CONTACTS 1
6 H02-0061 ZB4 - SWITCH COMPLETE FOR ZB4-ARM IN/OUT ARMSWING OUT/IN 1
7 H02-0044 ZB2 - SWITCH, COMPLETE, UP/DOWN NDT-INSIDE UP/D NDT-IIS COMPLETE WITH CONTACTS 1
7 H02-0067 ZB4 - SWITCH COMPLETE, PROBE UP/DOWN ZB4-IN/DOWN PROBE UP/DOWN 1
8 H02-0046 ZB2 - SWITCH, COMPLETE, BLACK P/B PRE 1998 NDT-MANUAL MANUAL IN CONSOLET 1
8[5] H02-0068 ZB4 - MANUAL SWITCH COMPLETE ZB4-MANUAL BLACK PUSH BUTTON 1
8 H02-0047 AB - SWITCH,COMPLETE, BLACK P/B -AB NDT-MANUEL-AB MANUAL IN CONSOLET-AB 1
9 H02-0052 ZB2 - SWITCH, COMPLETE, GREEN P/B NDT-START START IN CONSOLET 1
9 H02-0072 ZB4 - START SWITCH COMPLETE, GRN BUTTON ZB4-START BUTTON 1
10 H43-0029 ZB2 - SWITCH, COMPLETE, PRE NOV98 FOR/OFF/REV COMPLETE OPERATOR & CONTACTS 1
10[6] H02-0065 ZB4 - FOR/OFF/REV ZB4-FOR/OFF/REV PANEL DIRECTIONAL SWITCH 1
10 H02-0020 AB - SWITCH, COMPLETE, POST NOV 98 FOR/OFF/REV-AB OPERATOR & CONTACTS-AB 1
11[7] H02-0039 ZB2 - FLAW LIGHTCOMPLETE W/CONTACTS, BLUE NDT-FLAW LIGHT OPERATOR AND CONTACT BLOCKS 1
11 H02-0064 ZB4 - FLAW LIGHT COMPLETE, ZB4 ZB4-FLAW LIGHT WITH BLUE LENS 1
12 H01-0062 50K POTENTIOMETER ASSY, 110 VOLT 50 K POT USED ON ALL NDTS #RVNAYSD503A 1
12 H01-0064 10K POTENTIOMETER ASSEMBLY 10 K POT 10 K 2
12 H01-0065 100K POTENTIOMETER ASSY, 220V 100 K POT ASSY NDT-INSPS ONLY #RVNAYSD104A 2
13 H02-0054 ZB2 - PILOT LIGHT/PBSW, COMPLETE,GRN NDT-TEST OVER OPERATOR AND CONTACT BLOCK 1
13 H02-0074 ZB4 - TIMER COMP PILOT LIGHT, COMPLETE ZB4-TEST OVER WITH GREEN LENS 1
14 H02-0055 ZB2 - COMPLETE SWITCH (PRE NOV98) NOR/OFF/REV REMOTE 1
14[8] H02-0069 ZB4 - NOR/OFF/REV ZB4-NOR/OFF/REV REMOTE DIRECTIONAL SWITCH 1
14 H02-0056 AB - SWITCH, ALLEN-BRADLEY NOR/OFF/REV-AB AFTER NOV-98 1
8 H02-0083 ZB2 - MANUAL SWITCH ASSY, BLK POST 1998 1
8 AB - MANUAL SWITCH WITH 2 N.O. CONTACTS
ELECTRICAL BOX
ELECTRICAL BOX - VIEW A
ELECTRICAL BOX - VIEW B
ELECTRICAL BOX - VIEW C
ELECTRICAL BOX - VIEW D
MED TRUCK PROBE
LIGHT TRUCK PROBE
WIDE BASE PROBE
SWING-ARM
CONTACTS ON OPERATORĂS CONSOLE
NDT-II SPREADER AND PARTS ON SPREADER
INSIDE OPERATORS CONSOLE
AIR SYSTEM
ITEM # ZB4 ZB4 DESCRIPTION ZB2 DESCRIPTION CROSS REFERENCE FOR INDIVIDUAL ZB2 TO ZB4 STYLE CONTACTS
1 H02-0070 ZB4 - POWER ON/OFF, SWITCH COMPLETE H02-0050 ZB2 - SWITCH, 2 POSITION, POWER ON/OFF ZB4 ZB4 DESCRIPTION ZB2 ZB2 DESCRIPTION
2 H02-0062 ZB4 - FAB/STEEL LIGHT COMPLETE H02-0037 ZB2 - FABRIC/STEEL LIGHT COMPLETE H45-0061 ZBE-101, CONTACT, N.O. LINE VOLTAGE H45-0026 ZB2-BE101, N.O. CONTACT LINE VOLTAGE
3 H02-0063[9] ZB4 - 2 POS SWITCH COMPLETE, FAB/STEEL H02-0038 ZB2 - 2 POS SWITCH, COMPLETE, STEEL/FABRIC H45-0062 ZBE-1016, CONTACT, N.O. 12 VDC H45-0027 ZB2-BE1016 - N.O. CONTACT 12 VDC
5 H02-0066  [10] ZB4 - RED MUSHROOM SWITCH COMPLETE H02-0040 ZB2 - RED MUSHROOM SWITCH COMPLETE H45-0063 ZBE-102, CONTACT, N.C. LINE VOLTAGE H45-0028 ZB2-BE102, N.C. CONTACT LINE VOLTAGE
6 H02-0061 ZB4 - SWITCH COMPLETE FOR ARM SWING H02-0036 ZB2 - SWITCH, COMPLETE, ARM SWING H45-0064 ZBE-1026, CONTACT, N.C. H45-0029 ZB2-BE1026, N.C. CONTACT 12 VDC
7 H02-0067 ZB4 - SWITCH COMPLETE, PROBE UP/DOWN H02-0044 ZB2 - SWITCH, COMPLETE, UP/DOWN H45-0060 ZB4-BZ009, SWITCH BASE H45-0040 ZB2-BZ009, SWITCH BASE
8 H02-0068   ZB4 - MANUAL SWITCH COMPLETE P/B H02-0046 ZB2 - SWITCH, COMPLETE, BLACK P/B PRE 1998 H45-0046 ZB4-BA2, P/B BLACK H45-0023 ZB2-BA2, P/B, BLACK
8 H02-0068   ZB4 - MANUAL SWITCH COMPLETE H02-0083 ZB2 - MANUAL SWITCH ASSY, BLK POST 1998 H45-0047 ZB4-BA3, P/B GREEN H45-0024 ZB2-BA3, P/B, GREEN
9 H02-0072 ZB4 - START SWITCH COMPLETE, GRN P/B H02-0052 ZB2 - SWITCH, COMPLETE, GREEN P/B H45-0049 ZB4-BD2 - 2 POSITION SWITCH H45-0025 ZB2-BD2 - 2 POSITION SWITCH
10 H02-0065   ZB4 - FOR/OFF/REV H43-0029 ZB2  FOR/OFF/REV, (PRE NOV 98) H45-0051 ZB4-BJ3, 3 POSITION SWITCH H45-0032 ZB2-BJ3, 3 POSITION SWITCH
11 H02-0064 ZB4 - FLAW LIGHT COMPLETE, ZB4 H02-0039 ZB2 - FLAW LIGHT COMPLETE BLUE H45-0053 ZB4-BV01, PILOT LIGHT HEAD, WHITE H45-0034 ZB2-BV01, PILOT LIGHT HEAD, WHITE
13 H02-0074 ZB4 - TIMER COMP LIGHT, COMPLETE, GREEN H02-0054 ZB2  TEST OVER LIGHT, COMPLETE, GREEN H45-0056 ZB4-BW13, PTT GREEN LIGHT HEAD H45-0035 ZB2-BV031, PTT GREEN LIGHT HEAD
H45-0057 ZB4-BW16, BLUE LIGHT HEAD H45-0036 ZB2-BV061, PTT BLUE LIGHT HEAD
14 H02-0069   ZB4 - NOR/OFF/REV H02-0055 ZB2  NOR/OFF/REV SWITCH (PRE NOV 98)
[1]
der:
If this unit is older than 11/1997 (TEI serial numbers 722 and lower) order an additional Normally Closed contact part number H45-0028. If the unit is TEI serial number 722 through 900 a check with the customer should be made to verify the number of Normally Closed contacts used for this switch.
[2]
der:
4/2000 Serial number TEI 1295 first to use White Lens for Steel and Fabric indicator lights.
[3]
der:
5/18/1996 TEI Serial #745 was the first to use the Red Mushroom for the High Voltage On/Off.

If TEI Serial number is 747, 754, 757, or Serial numbers 745-491 a Two-Position Keyed switch was used. The Red Mushroom will replace the Two-Position switch.

If the TEI Serial number is less than 425 there is only one Normally closed contact on the High Voltage On / Off.

[4]
der:
 If ordering this part to replace H02-0040, order in addition one of part number H45-0062, ZBE1016, 12 VDC contact normally open.

5/1996 Serial # TEI 745 is teh first to use the H02-0066 style. Before the High Voltage On / Off was either a key switch or a 2 position selector switch.
[5]
der:
 If ordering this part to replace H02-0046, order in addition one of part number H45-0062, 12 VDC contact normally open.

If ordering this part to replace H02-0083, order in addition one of part numberH45-0062, 12 VDC contact normally open and one of part number H45-0061 contact normally open, line voltage.
[6]
der:
 If ordering this part to replace H43-0029, order in addition two of part number H45-0063 contact normally closed, line voltage.
[7]
der:
4/2000 Serial number TEI 1295 first to use Blue Lens for Flaw indicator light.
[8]
der:
If ordering this part to replace H02-0055, order in addition two of part number H45-0063 contact normally closed, line voltage.
[9]
der:
[10]
der: